• Thanks for stopping by. Logging in to a registered account will remove all generic ads. Please reach out with any questions or concerns.

Canada's tanks

Even Germany had problems with bogging down. The problem with farmlands that are loamy is that the low spots retain water more than the high spots - especially in the spring. For very practical reasons, tracked vehicles want to manoeuvre through the low grown so as to stay hull or turret down. Sometimes that bites you in the ass.

You can compensate to a point with track width - in fact the track ground pressure of the lighter Leo 1 (0.86 kg/cm2) isn't much different from that of the Leo 2 (0.89 kg/cm2) or the Challenger 2 (0.9 kg/cm2) but the M1A2 goes up to 1.09 kg/cm2. Its forerunner, the M60, was at 0.77 kg/cm2. Interestingly , T72, T80 and T90s come in at around 0.89, 0.92 and 0.94 kg/cm2 respectively. Not much difference there.

Training plays a big role here. The bridge issue, on the other hand, is a real limitation as it deals with raw weight rather than ground pressure.

🍻
why the Japanese came up with the type 10


"The predecessor of the Type 10, the Type 90, was deployed only in Hokkaido due to road and bridge weight limitations in mainland Japan. For this reason, weight was a priority in design, as the Type 10 needed to be capable of deploying anywhere in Japan. Size and weight reductions made the Type 10 six tonnes lighter than the Type 90. Approximately 84% of bridges in Japan can accommodate the Type 10, compared to only 65% for the Type 90, and ~40% for other NATO tanks.[16]"
 
Training plays a big role here. The bridge issue, on the other hand, is a real limitation as it deals with raw weight rather than ground pressure.

🍻
If you have enough bridging you can temporarily beef up a bridge by placing bridging on it to spread out the weight and build piers underneath.
 
Even Germany had problems with bogging down. The problem with farmlands that are loamy is that the low spots retain water more than the high spots - especially in the spring. For very practical reasons, tracked vehicles want to manoeuvre through the low grown so as to stay hull or turret down. Sometimes that bites you in the ass.

You can compensate to a point with track width - in fact the track ground pressure of the lighter Leo 1 (0.86 kg/cm2) isn't much different from that of the Leo 2 (0.89 kg/cm2) or the Challenger 2 (0.9 kg/cm2) but the M1A2 goes up to 1.09 kg/cm2. Its forerunner, the M60, was at 0.77 kg/cm2. Interestingly , T72, T80 and T90s come in at around 0.89, 0.92 and 0.94 kg/cm2 respectively. Not much difference there.

Training plays a big role here. The bridge issue, on the other hand, is a real limitation as it deals with raw weight rather than ground pressure.

🍻
For these situations I give you the LOG!

Ren and Stimpy had it right "its big, its heavy its wood!".
 
For these situations I give you the LOG!

Ren and Stimpy had it right "its big, its heavy its wood!".
Not being a Ren and Stimpy fan, I had to Google this. Couldn't get past the fact that I remember the original Slinky ads. Some things just stay with you.

🍻
 
Even Germany had problems with bogging down. The problem with farmlands that are loamy is that the low spots retain water more than the high spots - especially in the spring. For very practical reasons, tracked vehicles want to manoeuvre through the low grown so as to stay hull or turret down. Sometimes that bites you in the ass.

You can compensate to a point with track width - in fact the track ground pressure of the lighter Leo 1 (0.86 kg/cm2) isn't much different from that of the Leo 2 (0.89 kg/cm2) or the Challenger 2 (0.9 kg/cm2) but the M1A2 goes up to 1.09 kg/cm2. Its forerunner, the M60, was at 0.77 kg/cm2. Interestingly , T72, T80 and T90s come in at around 0.89, 0.92 and 0.94 kg/cm2 respectively. Not much difference there.

Training plays a big role here. The bridge issue, on the other hand, is a real limitation as it deals with raw weight rather than ground pressure.

🍻
A huge part of the problem is the rubber track pads everyone uses to keep the civies happy. We ran out of those on Centurion and switched to our war track. No rubber. Just steel. Very few bogged recovery issues while running those.
 
A huge part of the problem is the rubber track pads everyone uses to keep the civies happy. We ran out of those on Centurion and switched to our war track. No rubber. Just steel. Very few bogged recovery issues while running those.
That is what the grousers are for…

Most of the new stuff (or last few decades stuff) you can mix grousers and pads so it doesn’t tear up the roads - but gives good traction in mud, sand, snow and ice etc as well

Some of the newest stuff with 100% rubber tracks can take clip ons for additional traction, I believe they are only really needed for ice, as the standard full rubber combat tracks apparently grip really well in most terrain other than ice.
 
If you have enough bridging you can temporarily beef up a bridge by placing bridging on it to spread out the weight and build piers underneath.
or bring your own bridge, lots of bridge companies here who could span most European rivers with ease using stuff in their lay down yards. put it on a boat and send it over.
 
or bring your own bridge, lots of bridge companies here who span most European rivers with ease using stuff in their lay down yards. put it on a boat and send it over.
And they have armored vehicles to emplace them?
 
A huge part of the problem is the rubber track pads everyone uses to keep the civies happy. We ran out of those on Centurion and switched to our war track. No rubber. Just steel. Very few bogged recovery issues while running those.
One of the reasons we used rubber track pads was to protect "our" road network, especially our logistical lines of communications road network, so that it would be ready for war. The West Germans, in the 1950s and '60s, still had more than enough construction/reconstruction projects on the go to use up pretty much all of the country's heavy construction capacity. We, NATO armies, were doing ourselves an important operational level favour by keeping the roads in half decent repair.
 
Back
Top